Carlson Caliper Stickers Vinyl Decals - Brake Hardware Series Kit

Vinyl Decals come as three layers — paper backing, vinyl design, clear transfer tape on top. The transfer tape lifts the vinyl onto the surface and is peeled away at the end.

1. 1 Clean the surface Wipe with an alcohol wipe — no wax, polish or oil residue. Dry it fully before applying.
2. 2 Burnish the tape Rub firmly over the transfer tape with a card so the vinyl sticks to the tape, not the paper backing.
3. 3 Peel the paper Slowly peel the white paper backing at a 45° angle — the vinyl should stay on the transfer tape. If it lifts, lay it back down and burnish again.
4. 4 Position & press Place the tape on the surface, line up the design, then press firmly from the centre outward with a card.
5. 5 Peel the transfer tape Slowly peel the clear tape back at 45°, keeping it flat against the surface. Only the vinyl design stays behind.