Commander 114 Aircraft Stickers – Nameplate 2-Pack Decals
Commander 114 Aircraft Stickers – Nameplate 2-Pack Decals
Commander 114 Aircraft Stickers – Nameplate 2-Pack Decals
Custom size available 5-year outdoor vinyl Waterproof & weatherproof

Commander 114 Stickers (2-Pack) – Aircraft Nameplate Decals

SKU: 9-000403

Set in solid capitals with a slanted outline numeral, this is the Commander 114 nameplate cut as a single piece of vinyl. It sits naturally along a cowling side or an aft fuselage panel, where the original decal runs.

£4.00
per sticker · 1 sticker
Colour— FinishGlossy Size— Total£4.00
Got your own design? Upload your artwork — get it as a Vinyl Decal or a Printed Sticker Choose type →
Colour — Gloss Black
Finish
Size (longest side)
Pairs (2 stickers per pair)

The Commander 114 is the 260hp development of the 112 airframe, giving up the smaller Lycoming for the IO-540 and gaining the useful load that came with it. Its nameplate is set differently from the 112 too: "COMMANDER" in solid capitals rather than mixed case, with the numeral slanted and left open.

The pair is cut to run one to a side. Owners typically place them on the cowling flanks or just forward of the tail; the same lettering also works on a hangar door, a chock box or the lid of a headset case.

Specification

What You Get

  • Two die-cut vinyl stickers, supplied as a matched pair
  • Any width between 10–55cm / 4–21in
  • 19 colours to choose from
  • No background — the letters are cut from a single coloured sheet
  • Transfer tape included on every sticker

For a clean result, degrease the panel with isopropyl alcohol, hinge the sticker down from one edge with masking tape, then squeegee across and peel the transfer tape back on itself.

Added to cart! View your cart or keep shopping View cart →

The Commander 114 is the 260hp development of the 112 airframe, giving up the smaller Lycoming for the IO-540 and gaining the useful load that came with it. Its nameplate is set differently from the 112 too: "COMMANDER" in solid capitals rather than mixed case, with the numeral slanted and left open.

The pair is cut to run one to a side. Owners typically place them on the cowling flanks or just forward of the tail; the same lettering also works on a hangar door, a chock box or the lid of a headset case.

Specification

What You Get

  • Two die-cut vinyl stickers, supplied as a matched pair
  • Any width between 10–55cm / 4–21in
  • 19 colours to choose from
  • No background — the letters are cut from a single coloured sheet
  • Transfer tape included on every sticker

For a clean result, degrease the panel with isopropyl alcohol, hinge the sticker down from one edge with masking tape, then squeegee across and peel the transfer tape back on itself.

  • Reference
    9-000403

  • Sticker type
    Die cut
Secure Payment Information Shipping & Delivery Refund & Return Policy

You might also like

4 other products in the same category

Back to top